Load data for 6.35 Browning + .251 | 35gr | Hornady XTP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.251 \| 35gr \| Hornady XTP
Manufacturer SKU:	35450
Bullet Weight:	35gr \| 2.3g
Bullet Diameter:	0.251" \| 6.38mm
Bullet Length:	0.330" \| 8.4mm
Caliber:	6.35 Browning load data
Case Length (l3):	0.612" \| 15.5mm
Cartridge Length (C.O.L.):	0.820" \| 20.8mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	4.9 Grains of Water \| 0.32 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	17405 psi \| 1200 bar
LID:	LID_B2559_C977
Last updated:	2025-01-01

Load data for 42 loads in caliber 6.35 Browning with .251 | 35gr | Hornady XTP bullet and 21 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	76%	14170	81%	**58	86%
ADI APS 450	<<locked>>	66%	13242	76%	**20	100%
ADI AS 30	<<locked>>	76%	13808	79%	**89	97%
ADI AS 50N	<<locked>>	76%	14083	81%	**09	92%
Accurate Solo 1000	<<locked>>	71%	12836	74%	**40	91%
[Accurate Solo 1250]*	<<locked>>	90%	14591	84%	**38	84%
[Baschieri & Pellagri 100]*	<<locked>>	82%	13953	80%	**96	89%
[Hodgdon Universal]*	<<locked>>	84%	14170	81%	**58	86%
[Lovex S011]*	<<locked>>	65%	13358	77%	**53	85%
Maxam CSB 2	<<locked>>	97%	12981	75%	**88	90%
Maxam CSB 3	<<locked>>	85%	14185	81%	**29	90%
Maxam CSB 4	<<locked>>	78%	13329	77%	**96	92%
Maxam CSB 5	<<locked>>	72%	13111	75%	**93	99%
[Ramshot Zip]*	<<locked>>	64%	15360	88%	**55	87%
ReloadSwiss RS 12	<<locked>>	88%	14098	81%	**47	95%
Rottweil P 801	<<locked>>	77%	13605	78%	**91	97%
Vihtavuori N310	<<locked>>	68%	14866	85%	**45	100%
Vihtavuori N320	<<locked>>	84%	13822	79%	**55	93%
Vihtavuori N32C Tin Star	<<locked>>	89%	7890	45%	**2	93%
[Vihtavuori N330]*	<<locked>>	90%	14707	85%	**81	86%
[Winchester 231]*	<<locked>>	71%	15360	88%	**55	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	69%	11676	67%	**73	82%
[ADI APS 450]²	<<locked>>	57%	10240	59%	**2	98%
[ADI AS 30]²	<<locked>>	57%	8688	50%	**9	90%
[ADI AS 50N]*²	<<locked>>	59%	9152	53%	**2	84%
[Accurate Solo 1000]*	<<locked>>	62%	10269	59%	**2	87%
[Accurate Solo 1250]*	<<locked>>	82%	11995	69%	**47	80%
[Baschieri & Pellagri 100]*	<<locked>>	66%	9094	52%	**9	81%
[Hodgdon Universal]*	<<locked>>	77%	11676	67%	**73	82%
[Lovex S011]*²	<<locked>>	58%	10820	62%	**1	80%
[Maxam CSB 2]*	<<locked>>	81%	8992	52%	**07	82%
[Maxam CSB 3]*	<<locked>>	68%	9311	54%	**5	82%
[Maxam CSB 4]*	<<locked>>	61%	8615	49%	**9	84%
Maxam CSB 5	<<locked>>	63%	10385	60%	**1	96%
[Ramshot Zip]*²	<<locked>>	58%	12720	73%	**66	84%
[ReloadSwiss RS 12]*	<<locked>>	66%	7847	45%	**1	83%
Rottweil P 801	<<locked>>	63%	9108	52%	**24	91%
[Vihtavuori N310]²	<<locked>>	59%	11502	66%	**43	100%
[Vihtavuori N320]*	<<locked>>	67%	9007	52%	**1	85%
[Vihtavuori N32C Tin Star]*	<<locked>>	69%	5511	32%	**4	84%
[Vihtavuori N330]*	<<locked>>	83%	12299	71%	**96	82%
[Winchester 231]*	<<locked>>	65%	12720	73%	**66	84%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data